PBX cards and modules are the chassis-installed interface and feature boards that add trunk, station, signalling and feature capability to enterprise PBX platforms. Tech-Star supplies new and refurbished PBX cards and modules for major business telephony vendors including Panasonic KX-TDA/TDE, NEC UNIVERGE SV9100/SV9300/SV9500, Siemens HiPath 3000/4000, Mitel MiVoice, Avaya IP Office and Aastra MX-ONE, covering analogue and digital line cards, BRI and PRI trunk interfaces, IP gateway modules and a wide range of feature-specific expansion boards.Refurbished PBX cards and modules are in active demand for the support, capacity expansion and end-of-life maintenance of installed enterprise voice platforms across hospitality, healthcare, retail and corporate sites. Browse the PBX card and module catalogue or submit any part number via the enquiry form for current pricing and availability.
Showing 481–528 of 953 results
Mitel 9180-510-001-NA: SX-200 ML/EL FIM II Module NOTE(S): Sits on BCC lll / PRI or PIMCC cards. Can replace one of three circuits on Control Triple CIM card for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9180-510-002-NA: Fiber Interface Module ll (FIM ll) 5km MM NOTE(S): Sits on BCC lll / PRI or PIMCC card. Can replace one of three circuits on the Control Triple CIM for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9180-510-003-NA: Fiber Interface Module ll (FIM ll) 14Km SM NOTE(S): Sits on BCC lll / PRI or PIMCC card. Can replace one of three circuits on Control Triple CIM card for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9180-510-004-NA: SX-200 EL/ML Dual link T1 Module NOTE(S): This Dual Link T1 Module is used with the PRI or BCCIII. The T1 module is equipped with a CSU. The minimum S/W requirement for the PRI card is LW17.4 The min. S/W requirement for the BCC lll card is LW18 Rel 2 for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9180-510-010-NA: Copper Interface Module (CIM) NOTE(S): Sits on BCClll or PRI or PIMCC card for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400-100-301-NA: Peripheral Fim Carrier for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Dual T1 Adapter (SX-200 LIGHT) for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 Peripheral Node shelf, AC-powered peripheral cabinet for line, trunk and control cards.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 Peripheral Node I shelf, AC-powered peripheral cabinet for line, trunk and control cards.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 Peripheral Node II shelf, AC-powered peripheral cabinet for line, trunk and control cards.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 DSU (Digital Service Unit) Node shelf, peripheral cabinet for digital line/trunk interfaces.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 Light Micro peripheral node and cabinet, compact peripheral-shelf variant for the SX-2000 Light system.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 Redundant Control Node and cabinet, standby main-controller hardware for control-redundant systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400-200-200-NA: SX-2000 peripheral node item.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 DSU (Digital Service Unit) Node shelf – confirm exact node variant against the unit label.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400-200-301-NA: SX-2000 peripheral node item. Tell us the cabinet you are working on and we will match it.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 Fibre Interface Module (FIM), terminates the fibre link between a Peripheral Node and the main controller.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400-300-302-NA: Quad Fim Carrier for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400-300-310-NA: FIM Carrier Card NOTE(S): For integrating ISDN nodes to S, VS and SG Systems for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400-300-312-NA: SX-2000 Control Resource III circuit card, required for systems running the OPS Manager ETI interface.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400-300-317-NA: Control FIM Carrier card, SX-200 ML Release 1 systems only.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400-700-301-NA: Application Fibre Controller W/FIM NOTE(S): For use with Release 4 and prior ISDN Nodes for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9400300308NA: SX-2000 FIM (Fiber Interface Module) Carrier/DSU card.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel 9401-000-024-NA: Music on Hold Paging Unit (DNIC) for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel CB ACD 2853: Mitel PBX card.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel CB ACP 5409: Mitel PBX card.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MA217AA: CEPT Interface Assembly for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MA217BA: SX-2000 era card in Mitel’s MA numbering.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MA218AA: DS1 Interface Assembly for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MA225AA: SX-2000 era card in Mitel’s MA numbering.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MB160AAA: Dual Link PRI Card NOTE(S): For use with Release 5 and above ISDN Nodes for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 Main Controller II card, processor card running the SX-2000’s call-control software.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 Control RAM II card, main-control-shelf memory card alongside the Main Controller card.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC215AD: Main Control IIIe Card for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC243BA: Circuit Switch Matrix II Card for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC264AA: SX-2000 CEPT formatter card, the board that connects the system to CEPT digital trunk links and allocates 60 trunks.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC264BA: SX-2000 CEPT formatter card, second issue. Same 60 trunk digital link function as the AA board.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC264CA: SX-2000 CEPT formatter card, third issue, the latest of the three builds we hold.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC269AA: SX-2000 Primary Rate Interface (E1 PRI) card.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC270AA: SX-2000 ISDN PRI Card NOTE(S): The ISDN PRI Dual link card is a digital service card and requires a DSU slot This Dual Link Card DOES NOT include Digital Link options. Digital Link Options MUST be purchased separately. Pre-requisite(s): SX-2000 Ligh for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC271AA: SX-2000 E1 R2 Dual Link Card INCLUDE(S): 9125-271-000-NA R2 Application Software (Qty 1) NOTE(S): This R2 Dual Link card DOES NOT include Digital Link options Digital Link Options MUST be purchased separately Pre-requisite(s) required: Minimum Soft for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC312AA: SX-2000 peripheral switch controller card, the board that controls a group of twelve peripheral interface cards.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC312AB: Peripheral Switch Control II Card for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC320BB SX-2000 ONS analogue line card.
| Platform | Mitel SX-2000 ONS Line Card |
|---|---|
| Manufacturer | Mitel |
Mitel MC320CD SX-2000 16-circuit ONS analogue line card.
| Platform | Mitel SX-2000 ONS Line Card |
|---|---|
| Manufacturer | Mitel |
Mitel SX-2000 ONS CLIP line card (MC320 family), on-premise station line card with Caller ID support.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC320FA: ONS CLASS Line Card for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
Mitel MC321AC: OPS Line Card (8 Circuits) for Mitel SX-200/SX-2000/3300 ICP telephone systems.
| Platform | Mitel SX-200 / SX-2000 / 3300 ICP telephone system |
|---|---|
| Manufacturer | Mitel |
