PBX Card / Module

LG 71102508011206 Cabinet-Digital Key Service Unit for LG digital telephone systems.

LG 71545409026652 LC0B8 8-port analogue extension card for LDK-300 PBX system.

Marconi 1HAC50090FAP: UPI PWA circuit card assembly, NATO stock number 5998-17-115-0490.

Mitel 1353633AA: Mitel PBX part number. Tell us the system and slot you are filling and we will identify the item we hold.

Mitel 1695MTLHSG: 3300 CITELink GATEWAY NOTE(S): This Gateway connects Norstar sets to the 3300 ICP. The 3300 ICP must have Rls 4.1 minimum for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 1898MTLHSG: 3300 CITELLink GATEWAY for MERIDIAN 1 for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 4363-70S: spare system modem for Mitel telephone systems.

Mitel 50000730: Mitel part number in the 50000000 series.

Mitel 50001247: 3300 – 128 Channel Echo Canceller for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 50001248: ICP Dual Fiber Interface Module NOTE(S): In the U.S. Channels only: When ordering with 3300 ICP product this part may be purchased direct from Mitel for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 50001730: LS/CLASS Trunk Card (8 circuit) NOTE(S): System software at level LW19 Rls 2.0 UR 1 or higher is required for this card to work. This card is not backward compatible for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel SX-2000 Triple FIM carrier card, three fibre-interface links on one card for higher-density connections.

Mitel Networks 3300 Universal Controller, standard call-server controller in the 3300 ICP range.

Mitel 3300 Universal Controller, standard call-server controller in the 3300 ICP range.

Mitel 50003560: Embedded Digital Trunk Module NOTE(S): In the U.S. Channels only: When ordering with SX-200 ICP product this part may be purchased from Wholesale Distribution. For SX-200 ICP product this part can only be used with an MX Controller. Embedded Digital for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Dialogic D/480 dual-span T1 digital network interface board, genuine Dialogic hardware stocked under Mitel numbering.

Dialogic single-span E1 digital network interface board with filter (UK), genuine Dialogic hardware stocked under Mitel numbering.

Mitel 50003695: 3300 Multi-mode Extended Dual FIM NOTE(S): Used to extend the distance that PER and DSU nodes can be installed from a 3300 ICP. As a guideline, mulit-mode can reach up to 3 miles (5 km) for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 50003725: ICP Analogue Option Module NOTE(S): In the U.S. Channels only: When ordering with 3300 ICP product this part may be purchased direct from Mitel. Used to expand System by 6 additional LS/CLASS and 2 ONS for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 50003726: SX-200 IP Stratum 3 Clock Module NOTE(S): Always required with T1 or PRI for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Spare parallel-port Zip removable-disk drive for a physical Mitel NuPoint IP Messenger server.

Mitel 50004154: 256MB Blank Flash Card FRU for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 50004451: Quad CIM Module (SX-200 ICP MX) NOTE(S): Only supported in Software Release 2 and above The Quad CIM is supported on the SX-200 ICP MX Four connections are provided for Digital Bays and NSU Maximum 2 Quad CIMS per SX-200 ICP MX controller Digital Bay for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 50004590: Release 2 replacement handset for 5200 Series IP Phones, supplied as a 25-pack.