Telecoms & Network Equipment for Nokia, Alcatel, Eriksson & more | Tech-star

Spare 48V telephony configuration card for the Mitel NuPoint Messenger Model 70 voicemail chassis.

8-port loop-start line card expansion module for the Mitel NuPoint Messenger Model 70 voicemail system.

Dual T1, 24-port digital line card set expansion for the Mitel NuPoint Messenger Model 70 voicemail system.

2-port shared-resource fax card for the Mitel NuPoint Messenger Model 70 unified-messaging system.

4-port E&M line card expansion module for the Mitel NuPoint Messenger Model 70 voicemail system.

DSP24 line card for the Mitel NuPoint Messenger Model 70, pairs with a Dual T1 24-port card set.

Set of 8 RJ61-to-2xRJ11 cable adaptors for the Mitel NuPoint Messenger Model 70 voicemail system.

Ethernet 16 network interface card for the Mitel NuPoint Messenger Model 70 voicemail and unified-messaging system.

Mitel 9180-305-000-NA: System Fail Transfer Unit (6 circuit) for SX-200/SX-2000 ICP power/controller-failure fallback.

Mitel 9180-510-003-NA: Fiber Interface Module ll (FIM ll) 14Km SM NOTE(S): Sits on BCC lll / PRI or PIMCC card. Can replace one of three circuits on Control Triple CIM card for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 9180-510-004-NA: SX-200 EL/ML Dual link T1 Module NOTE(S): This Dual Link T1 Module is used with the PRI or BCCIII. The T1 module is equipped with a CSU. The minimum S/W requirement for the PRI card is LW17.4 The min. S/W requirement for the BCC lll card is LW18 Rel 2 for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 9400-100-301-NA: Peripheral Fim Carrier for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Dual T1 Adapter (SX-200 LIGHT) for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel SX-2000 Peripheral Node II shelf, AC-powered peripheral cabinet for line, trunk and control cards.

Mitel SX-2000 DSU (Digital Service Unit) Node shelf, peripheral cabinet for digital line/trunk interfaces.

Mitel 9400-200-200-NA: SX-2000 peripheral node item.

Mitel SX-2000 DSU (Digital Service Unit) Node shelf – confirm exact node variant against the unit label.

Mitel SX-2000 Fibre Interface Module (FIM), terminates the fibre link between a Peripheral Node and the main controller.

Mitel 9400-300-310-NA: FIM Carrier Card NOTE(S): For integrating ISDN nodes to S, VS and SG Systems for Mitel SX-200/SX-2000/3300 ICP telephone systems.

Mitel 9400-300-312-NA: SX-2000 Control Resource III circuit card, required for systems running the OPS Manager ETI interface.